Differences

This shows you the differences between two versions of the page.

--- articles:changing_manual_transmission_fluid_on_a_190e [2020/11/09 08:46] – [Choosing a fluid] john5788
+++ articles:changing_manual_transmission_fluid_on_a_190e [2020/11/10 08:58] (current) – [Procedure] john5788
@@ Line 57: / Line 57: @@
 </grid>
+===== Tools needed =====
+<grid>
+<col sm="6">
+  * Method to lift vehicle
+  * Drain pan
+  * Hazet oil service wrench, part number 117 589 02 07 00. 14mm hex, 13mm box end. Or a 14mm hex tool short enough to fit in the transmission tunnel
+  * Fluid transfer pump
+</col>
+<col sm="3">
+<thumbnail>
+{{ articles:117589020700.jpg?300 }}
+<caption>Hazet oil service wrench</caption>
+</thumbnail>
+</col>
+<col sm="3">
+<thumbnail>
+{{ articles:fluidtransferpump.jpg?300 }}
+<caption>Fluid Transfer Pump</caption>
+</thumbnail>
+</col>
+</grid>
+===== Procedure =====
+<grid>
+<col sm="6">
+  - Lift vehicle such that vehicle is level in the air
+  - Remove oil filler plug first, pay attention as to not lose the metal seal ring.
+    - Perform this item first to make sure there is a method for refilling the transmission with fluid
+  - Remove oil drain plug, pay attention as to not lose the metal seal ring
+  - Once fluid is completely drained, clean drain plug, and reinstall with max torque of 60 Nm
+  - Using the fluid transfer pump, fill the transmission fluid until it overflows from the filler hole
+  - Reinstall oil filler plug
+  - Lower the vehicle, check for leaks
+</col>
+<col sm="6">
+<grid>
+<col sm="6">
+<thumbnail>
+{{ articles:removingmanualtransmissionfillplug.jpg?300 }}
+<caption>Removing fill plug</caption>
+</thumbnail>
+</col>
+<col sm="6">
+<thumbnail>
+{{ articles:drainingoldmanualtransmissionfluid.jpg?300 }}
+<caption>Draining old transmission fluid</caption>
+</thumbnail>
+</col>
+<col sm="6">
+<thumbnail>
+{{ articles:pumpmobil1syntheticatf.jpg?300 }}
+<caption>Pumping fresh Mobil 1 Synthetic ATF</caption>
+</thumbnail>
+</col>
+</grid>
+</col>
+</grid>