This is an old revision of the document!
Replacing 190E Steering Gearbox
This article is a reference for replacing the steering gearbox on a 190E and may be applicable to similar models. Remanufactured steering gearboxes may be purchased from C & M Hydraulics based in Las Vegas, Nevada.
Time | 2 hours |
---|---|
Cost | |
Difficulty | |
Parts Required | Power steering fluid - 1 46 0001 Power steering filter - 000 466 2104 Steering coupler - 123 460 0210 Renew locking hex nuts for tie rod ends - N913002010010 |
Applicable models | All 190Es with left hand drive |
Special Tools
Balljoint separator - Used for removing the left tie rod and center drag link
Gear puller - Removing pitman arm from steering gearbox output shaft
Suction gun - Used to remove old power steering fluid
Snap ring plier - Remove snap ring from pitman arm shaft
Power Steering Fluid
Procedure
Preparation
- Lift front end of vehicle in the air